5 Great Things about Becoming a Columbus, Ohio Electrician

electricianA Columbus, Ohio electrician’s job includes the installing, maintaining, and repairing of electrical wiring, fixtures, and equipment. To become an electrician; one must earn a certification or associate’s degree, complete an industry-sponsored apprenticeship, and become licensed.  It is not a trade to master, but the hard work and dedication quickly pay off.  

Here are 5 Great Things about Becoming an Electrician:

  • It is a noble and respectable profession. Being an electrician in the construction industry is a top, noble and respectable profession. After all, handling electricity every day is nothing to take lightly- requiring a good amount of skill and knowledge.
  • It is not physically tiring compared to other jobs. Although it involves some physical activity, being an electrician requires more problem-solving and having an eye for detail. It allows you to face new challenges for every new project that you handle.
  • It opens the opportunity for building your own business. By becoming an electrician, you get the chance of building your own business. As an electrician, you have acquired a skill that has a high demand regardless of the economic situation. If you are good at managing your financial status and time, you can become your boss by putting up an electrical service company once you’ve gained enough experience. Most electricians start from the bottom and move up by venturing into their own business.
  • It allows you to earn a decent, livable wage. As an electrician, you have acquired a skill that has a high demand regardless of the economic situation. In 2015, the U.S. Bureau of Labor Statistics released a report that the mean annual wage of electricians is $55,590. After gaining more experience, an electrician can earn up to six figures and higher.
  • Job security. In the recent future, less and less young people are pursuing trade jobs, but rather college degrees and jobs in other fields. The demand for electricians has always been very high, and the demand is only increasing with time.

Have you ever thought about becoming an electrician? It is essential that you are interested in working with electricity and have the passion for solving unique challenges required by the practice. With this drive, there is no question that you’ll become a successful electrician!

Is My Hot Water Heater Going Bad?

hot-water-heaterYour home’s water heater is a modern convenience that often gets taken advantage of until something goes wrong. If your hot water heater is having any of the problems listed below- it might be time to have it replaced or maintenance by a licensed plumber.

  • Inadequate Hot Water. Insufficient hot water is the most common sign that a water heater going bad. Mineral build-up occurs when water is heated. These mineral deposits settle to the bottom of the hot water storage tank and act as an insulator, keeping the heat produced by the burner to reach the water in the tank. However, the buildup of mineral deposits reduces the heat that reaches the water, so the supply of hot water is reduced.  
  • Foul Smell. Your hot water heater is going bad if the water has a foul smell. When the mineral deposits go out of the water heater, it gives the water a foul smell. These deposits move to your tap, blocking the screens in the aerators that lead to the slow flow of water.
  • Dull Color or Muddy Water. Dull color or muddy water indicates that your water heater is malfunctioning. Increased mineral deposits in the tank can make discolor the water, causing it to look dull or muddy. Turn off the unit then connect a hose to the drainage bib, drain and inspect the contents.
  • Banging or Popping Noise. Banging or popping noise is another sign that your hot water heater is going bad. This noise is caused by the buildup of mineral deposits in the water tank. These deposits insulate the heat from the water as water is being heated by the hot water heater, which causes the tank to overheat and make the banging or popping noises. Metal fatigue results because of the constant heating of the tank and sooner or later, it will break down and starts to leak. To prevent this, flush the tank annually.
  • Leaking or Corroded Connections. Leaking or corroded connections to your hot water heater indicate trouble. To prevent corrosion, hot water heaters use an anode that weakens in time due to the natural corrosion process. The corrosive forces start to attack the tank and connections when the element weakens that leads the water heater to go bad.
  • Leaking Water Tank. It is pretty obvious that there is a problem when your hot water tank leaks. Turn off the gas or disconnect the electricity to the tank to allow the water to cool down. Remove and replace your leaking water tank immediately to prevent any flooding.
  • Water is Too Hot or Not Enough. Adjusting the thermostat can solve this problem. The ideal hot water temperature for most households is between 120 and 140 degrees. Your tank could have a broken heating element if the water is not too hot or hot enough or no hot water is coming from it. If your hot water tank is run by natural gas, then the gas thermocouple might be broken. Replace this element to enjoy the hot water supply.


Hot water heater installation requires the skill of a professional plumber. Call American Air if you think yours might need replacing.

Buying an Old House? Have the Main Plumbing Line Scoped

main plumbing lineBuying an old house may seem grand, they are full of history and character; but they can also be full of costly problems. A house inspection is critical when buying a house, particularly if you decide to buy an older house. One of the most neglected areas during house inspection is the sewer line. The main plumbing line (sewer line) flows away from the house all the way to the street. Most home inspectors do not check the main plumbing line because it is hidden in the ground. They also do not have the right equipment to check it. If you are purchasing an old home, we recommend having the main plumbing line scoped by a licensed plumber.

Why to Have the Main Plumbing Line Scoped

Prevention. Identifying a problem before it turns up is much better than waiting for it to become serious. Leaking, flooding and foul smell are signs that there is a problem. A plumbing camera is inserted in your internal piping system that helps identify any plumbing issues easily. In older homes, the main plumbing line is typically made of cast iron. These lines can rust and disintegrate over time; allowing sewage to leak into the ground, or tree roots to invade and clog the line. If the camera scope shows leaking or blockage, you will be able to have the problem fixed before you purchase the home. This will save you thousands of dollars and a lot of headaches.

Even if you already own an older home, having the main plumbing line scoped could help prevent a bigger problem before it starts. Call American Air today if you have any plumbing concerns or questions. Our licensed plumbers are available to help!

Maintenancing Your Gas Fireplace

gas-fireplaceA gas fireplace can be a great addition to your home. They are beautiful and very practical, keeping you warm during the cold winter months.

You should have your gas fireplace checked by a certified heat technician once a year, but it is just as important for you to clean it yourself on a regular basis. Cleaning it monthly will keep it working safe and efficient.

Follow These Simple Steps to Clean Your Gas Fireplace

  • First, make sure that the gas valve is turned off, and all components of the fireplace are cool.
  • Use a vacuum cleaner with an attachment hose to suck up any dirt or debris inside the fireplace, paying close attention to the logs, controls and burner.
  • If there are lava rocks in the bottom of your fireplace, using a vacuum might not be the best idea as they can easily get sucked into the vacuum along with the dust. Instead, you can remove the logs and use a paint brush to dust them clean before putting them back.
  • If you have glass doors on the front of your fireplace, spray a mild window cleaner onto a cloth and use the damp cloth to clean the inside and outside of the glass doors.
  • After everything is cleaned and dry, use the manufacturer’s instructions to relight your fireplace.

While you’re cleaning, watch out for any broken pieces, blockage, rust or damage. If you come across something, have it checked by a professional before using the fireplace again. If your gas fireplace hasn’t been maintenanced by a certified heat technician in the last year, give American Air a call to set up an appointment today.